QLS 2000/3000 Series Digital Color Printers
18
Printer Setup
4. Confirm that the correct type of media (gap, continuous, inverted gap, or
mark) is specified.
5. Press Calibrate. Confirm that the correct type of media appears on the
display. If the media type displayed is not the actual type loaded, select No
and return to step 4.
6. Press the arrow keys to move the on-display indicator to Yes, then press
Select. The printer will perform an automatic calibration. When calibration
is complete, a message will be displayed that shows the relative reflectivity
or transmissiveness between the label and top-of-form mark or gap.
Label Length
Set label length for the longest label you will be printing to ensure memory is
not wasted on label area that is not used.
Maximum gap length in millimeters can also be specified. Default is 3 mm.
TO SPECIFY MAXIMUM LABEL MEDIA LENGTH:
1. Press the Menu pushbutton to display the Main menu.
2. Use the arrow buttons to move the on-display indicator to Media, then press
Select. The Media menu will be displayed.
3. From the Media menu, use the arrow buttons to position the on-display
indicator before Label.
4. Press the Select button to move to the next line.
5. Use the arrow keys to specify label length in millimeters.