Copyright © 2000 - 2005
This manual is copyrighted with all rights reserved. No part of this manual may be
reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any
language in any form by any means without written permission of QuickLabel® Systems.
LRU, CQL, QLS, QuickLabel, Range Boss, and Top Hand are trademarks of QuickLabel
Systems. MicroCell and RibbonRation are trademarks of Astro-Med, Inc. All other
trademarks are the property of their respective holders.
Limited Warranty
QuickLabel Systems, an Astro-Med, Inc. product group, warrants all non-wear components
of this product against defects in materials or workmanship for a period of one (1) year from
the date of original purchase. If the customer discovers a defect, this defect must be
reported promptly to QuickLabel Systems. QuickLabel Systems will, at its option, repair or
replace the defective component or product at no additional charge except as set forth
below.
Repair parts and replacement parts will be furnished on an exchange basis and will be
either reconditioned or new. All replaced parts become the property of QuickLabel
Systems. Travel, freight, and other expenses related to warranty repairs are not covered.
Service Agreements are available for purchase and provide on-site service and/or loaner
equipment. This warranty is void if the product has been damaged by accident, abuse,
neglect or misapplication, or if the product has been improperly installed, or if the product
has been modified without the express written permission of QuickLabel Systems.
With respect to printers and print and apply systems, QuickLabel Systems warrants the
printhead for a period of 90 days from the date of purchase, or one million linear inches,
whichever occurs first, contingent upon the use of QuickLabel Systems thermal transfer
ribbon. This specific printhead warranty does not apply to printheads damaged by
accident, abuse, neglect, misapplication, or the like.
QuickLabel Systems makes no warranty, either express or implied, with respect to this
product's fitness for a particular purpose. QuickLabel Systems is not responsible for your
product if it is lost or damaged in transit.
Canadian Emissions Requirements
This digital apparatus does not exceed the Class A limits for radio noise emissions from
digital apparatus set out in the Radio Interference Regulations of the Canadian Department
of Communications.
Le present appareil numérique n’emet pas de bruits radioelectriques depassant les limites
applicables aux appareils numériques de la class A prescrites dans le Règlement sur le
brouillage radioelectrique edicte par le ministere des Communications du Canada.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation. Shielded cables must be used with this unit to ensure compliance
with the Class A FCC limits.
