QLS 2000/3000 Series Digital Color Printers
Printer Setup
9
8. You will be prompted to confirm that you want to permanently change the
communications parameters. To save communications parameters, move
the cursor before Yes, then press Select.
9. With the on-display indicator positioned before Delim press Select.
10. Use the arrow keys to select a command delimiter for commands to be
received by the printer. The default delimiter is <CR><LF>. If you are
using CQL 99 label creation software, use the default command delimiter.
11. You will be prompted to confirm. To confirm and save communications
parameters, move the cursor before Yes, then press Select.
Comm Port
The comm port in use (parallel, RS-232, or RS-422) must be selected to enable
communications. If either RS-232 or RS-422 are being used, baud rate can also
be selected. The default comm port is parallel.
NOTE
SERIAL COMMUNICATIONS ARE REQUIRED TO ENABLE
STATUS MESSAGES TO BE RECEIVED FROM THE PRINTER
OR TO ENABLE USE OF CQL™ 99 LABEL CREATION
SOFTWARE (BIDIRECTIONAL COMMUNICATIONS).
If using both parallel and RS-232 serial communications, select and set up RS-
232 first, then select and set up parallel communications.
TO SELECT COMM PORTS:
1. Press the Menu button to display the main menu.
2. Use the arrow keys to move the on-display indicator to Comm, then press
Select. The Communications menu will be displayed.
3. With the on-display indicator positioned before Port, press Select.
4. Use the arrow keys to specify which port is being used and press Select to
confirm.