Qlogic QConvergeConsole CLI 2400 Series, User Manual

Page: 135 / 366

SN0054667-00 C 7-1
7
NIC Partitioning (NPAR)
Noninteractive Commands
This chapter describes the noninteractive NIC partitioning (NPAR) command
format and parameters of QConvergeConsole CLI.
For an overview of NPAR, refer to Appendix A . NPAR is supported by the 3200
Series Intelligent Ethernet Adapters, and the 8200 Series Converged Network
Adapters.
Command Format
Noninteractive mode syntax includes the following:
qaucli -npar < switch > [< parameters> ]
Where
switch
is one of the following:
 -ainfo (Get NPAR Adapter Information)
 -changepersonality (Change Physical Function Personality)
 -ei (Get NPAR Command Line Return Codes)
 -eswitchinfo (Get NPAR eSwitch Information)
 -eswitchstats (Display eSwitch Statistics)
 -eswitchvportstats (Display eSwitch NPAR Statistics)
 -feswitchcfg (Change eSwitch Configuration—Physical Function)
 -finfo (Get NPAR Physical Function Information)
 -h (Help), -?, ?
 -ia (Enumerate NPAR Adapters)
 -if (Enumerate NPAR Physical Functions)
 -ip (Enumerate NPAR Physical Ports)
 -peswitchcfg (Change eSwitch Configuration—Physical Port)
 -pinfo (Get NPAR Port Information)
 -restoreeswitchcfg (Restore eSwitch Configuration)
 -setmaxbw (Set Maximum Bandwidth)
 -setminbw (Set Minimum Bandwidth)
NOTE:
To view the help, issue the
-h
command.