Qlogic QConvergeConsole CLI 2400 Series, User Manual

Page: 105 / 366

5–Fibre Channel Noninteractive Commands
-x (Output in XML Format 1)
SN0054667-00 C 5-37
-x
(Output in XML Format 1)
You can use this option with all noninteractive mode options that have a
corresponding interactive mode option (see
Table 5-1 ). This option must be the
first or last command in the command line.
When you use this option, the system shows all result and status messages in
XML format 1, a legacy format. This option is usually combined with the
-o
option
(see “-o (Output to a File)” on page 5-28 ) to create a text file with XML output so
that it can be parsed by an XML-compliant utility. For example to show adapter
general information and output it to an XML file named
output.xml
:
# qaucli -pr fc -i all -x -o output.xml
-x2
(Output in XML Format 2)
You can use this option with all noninteractive mode options that have a
corresponding interactive mode option (see
Table 5-1 ). This option must be the
first or last command in the command line.
When you use this option, the system shows all result and status messages in
XML format 2, standard XML format. This option is usually combined with the
-o
option (see “-o (Output to a File)” on page 5-28 ) to create a text file with XML
output so that it can be parsed by an XML-compliant utility. For example, to show
adapter general information and output it to an XML file named
output.xml
:
# qaucli -pr fc -i all -x2 -o output.xml
-z
(Display All HBA Information for One or All HBAs)
To show all information for one specific adapter or for all adapters in the system,
issue the following command:
# qaucli -pr fc -z (< hba instance > | < hba wwpn >) | <all>)
“Host Configuration (Command Line Option -z)” on page 5-2 covers this
command.
NOTE:
This option is valid only in noninteractive mode.
NOTE:
This option is valid only in noninteractive mode.