Qlogic QConvergeConsole CLI 2400 Series, User Manual

Page: 94 / 366

5–Fibre Channel Noninteractive Commands
-n (Set Selected HBA Parameter)
5-26 SN0054667-00 C
-n
(Set Selected HBA Parameter)
To set a specific parameter on a specific adapter, issue the following command:
# qaucli -pr fc -n (< hba instance > | < hba wwpn >) { (< param name > |
< param alias >) < param value > }
To restore the default BIOS (4G adapters only), issue the following command:
# qaucli -pr fc -n (< hba instance > | < hba wwpn >) default
Where:
The pairs < param name > < param value > and < param alias > < param value > can
be repeated to set multiple parameters with a single command.
Table 5-9 lists the adapter parameter names and aliases.
.
hba instance = Adapter number (use -g command to find)
hba wwpn = World wide port name of the adapter
param name = Name of the parameters
param alias = Alias of the parameters
param value = New value of the parameters
Table 5-9. Adapter Parameters
Description Name Alias Value
Connection options
ConnectionOption CO See table note a
Data rate
DataRate DR See table note b
Enable BIOS
EnableBIOS c
EB
1=Enable, 0=Disable
Enable extended logging
EnableExtendedLogging d
EL
1=Enable, 0=Disable
Enable Fibre Channel tape
EnableFCTape EF
1=Enable, 0=Disable
Enable hard loop ID
EnableHardLoopID HL
1=Enable, 0=Disable
Enable LIP full login
EnableLIPFullLogin FL
1=Enable, 0=Disable
Enable LIP reset
EnableLipReset LP
1=Enable, 0=Disable
Enable target reset
EnableTargetReset TR
1=Enable, 0=Disable
Execution throttle
ExecutionThrottle ET
1–65535
Frame size
FrameSize FR
512, 1024, 2048
Hard loop ID
HardLoopID HD
0–125
Interrupt delay timer
InterruptDelayTimer ID
0–255