Qlogic QConvergeConsole CLI 2400 Series, User Manual

Page: 167 / 366

9–Fibre Channel Interactive Commands
HBA Parameters
SN0054667-00 C 9-9
Display HBA Parameters (-c)
1. HBA Parameters

<port selection>

1. Display HBA Parameters
From the HBA Parameters Menu, select the Display HBA Parameters option to
view adapter parameters. For example:
------------------------------------------------------------------------------
HBA Instance 0: QLE2462 Port 1 WWPN 21-00-00-1B-32-17-F9-C4 PortID 00-00-00
------------------------------------------------------------------------------
Connection Options : 2 - Loop Preferred, Otherwise Point-to-Point
Data Rate : Auto
Frame Size : 2048
Hard Loop ID : 0
Loop Reset Delay (seconds) : 5
Enable Host HBA BIOS : Disabled
Enable Hard Loop ID : Disabled
Enable FC Tape Support : Enabled
Operation Mode : 0 - Interrupt for every I/O completion
Interrupt Delay Timer (100ms) : 0
Execution Throttle : 16
Login Retry Count : 8
Port Down Retry Count : 30
Enable LIP Full Login : Enabled
Link Down Timeout (seconds) : 30
Enable Target Reset : Enabled
LUNs Per Target : 128
Out Of Order Frame Assembly : Disabled