Qlogic QConvergeConsole CLI 2400 Series, User Manual

Page: 264 / 366

10–Converged Network Adapter Interactive Commands
CNA iSCSI Configuration
10-60 SN0054667-00 C
 Configure IPV6 Settings —Select this option to configure IPV6 settings.
For example:
IPv6_Addr_Local_link [fe80::] :
IPv6_Addr_Routable0 [::] :
IPv6_Addr_Routable1 [::] :
Default_IPv6_Router [::] :
IPv6_Port [3260] :
IPv6_Gratuitious_Neighbor_Ad_Enable [off] :
IPv6_Redirect_Enable [off] :
 Configure IPV6 TCP Settings —Select this option to configure IPV6 TCP
settings. For example:
IPv6_Addr_Local_link [fe80::] :
IPv6_Addr_Routable0 [::] :
IPv6_Addr_Routable1 [::] :
Default_IPv6_Router [::] :
IPv6_Port [3260] :
IPv6_Gratuitious_Neighbor_Ad_Enable [off] :
IPv6_Redirect_Enable [off] :
 Save changes and reset HBA —Select this option to save changes and
reset the adapter.
 Refresh —Select this option to refresh the adapter data.
Legacy 4010 Restore Default Port Settings Select this option to restore
QLogic 4010 iSCSI adapter default port settings.
Save changes and reset HBA Select this option to save changes and reset the
adapter.
Port Restore Factory Defaults
2. CNA iSCSI Configuration

2. Port Configuration

<port selection>

3. Port Restore Factory Defaults
From the Port Link Configuration menu, select the Port Restore Factory
Defaults option to restore port factory defaults. A
Yes
response restores factory
default for all port parameters; a
No
response provides the opportunity to restore
defaults for selected parameters.