Qlogic QConvergeConsole CLI 2400 Series, User Manual

Page: 117 / 366

6–iSCSI Noninteractive Commands
-gcr (Retrieve FW Crash Record)
SN0054667-00 C 6-11
-gcr
(Retrieve FW Crash Record)
To get crash record information for the specified adapter port, issue the
-gcr
command as follows:
-gcr < hba_port_inst> < Crash Output File >
-h
(Help)
To view the QConvergeConsole CLI help file, issue the
-h
command as follows:
-h
For convenience, you can send the output to a file for easier viewing or printing as
follows:
qaucli -pr iscsi –h >file.txt
-i
(List All QLogic iSCSI HBA Ports Detected)
Use the
-i
command to view a list of all detected adapter port instances (“ports”)
in the system. Each port instance (hba_port_inst ) is identified by its number.
To view general adapter information, issue the
-i
command as follows:
-i [ hba_port_inst ]
When you use
hba_port_inst
, information for only that adapter port instance is
shown. When you do not use
hba_port_inst
, information for all ports in the
system is shown.
The following adapter (port) information is shown:
 Item number (order in which ports were detected)
 Adapter number, that is, the number of this adapter in the detection process
 Adapter port number (0 or 1) for this adapter
 Port instance number in the system (two-port adapters appear twice)
 Port Instance on the adapter
 Adapter model number (for example, QLA4010)
 Adapter serial number (for example, TFC0105C51704)
 Firmware version (for example, 3.0.1.45)
 Connection medium
 IP address (IP address of the adapter port instance)
 iSCSI name (adapter port iSCSI name; the QLogic default name or one you
assign)
 Alias (adapter port instance iSCSI alias name that you assign)
Figure 6-1 shows how to read the display.