Pyronix Enforcer 64, Installation Manual

Page: 76 / 88

Example SMS command send Description Example SMS command
response
1234 Disarm A
1234 = User Code. Disarm A = Will disarm in
Area A
Disarm; Area A
1234 Disarm ABCD 1234 = User Code. Disarm ABCD = Will
disarm in Areas ABCD. Disarm; Area ABCD
NOTE: If no areas are specified then all areas will disarm (default).
Arming with inputs bypassed via SMS text command
1234 Arm A Bypass 4
1234 = User Code. Arm A Bypass 4 = Arms
Area A and will bypass Input 4. Input Bypass; Area A Input 04
Force Arm: Area A
1234 Arm A Bypass Kitchen 1234 = User Code. Arm A Bypass Kitchen =
Arms Area A and will bypass the Input named
Kitchen. Input Bypass; Area A Kitchen
Force Arm: Area A
Bypassing inputs via SMS text command
1234 Bypass 6
1234 = User Code. Bypass 6 = In the next
arming procedure, Input 6 will be bypassed.
Input Bypass; Area A Input 06
1234 Bypass Garage 1234 = User Code. Bypass Garage = In the
next arming procedure, and will bypass the
Input named Garage. Input Bypass; Area A Garage
NOTE: Output names have to be one word and spelled exactly as written in the panel e.g. Garage Door is not acceptable. It has
to be written as Garage-Door in the panel and the respective command will be Garage-Door.
Checking the system status via SMS text command
1234 Status 1234 = User Code. Status. Area A Disarmed No Faults
Operating the user automation outputs via SMS text commands
1234 Output 1 On 1234 = User Code. User Output 1 turns on. OUTPUT 1 ON
1234 Output Garage-Door On 1234 = User Code output
Garage-Door on = Turns output named as
Garage-Door on. OUTPUT Garage-Door ON
1234 Output Garage-Door Off 1234 = User Code output
Garage-Door off = Turns output named as
Garage-Door off. OUTPUT Garage-Door OFF
NOTE: Output names have to be one word and spelled exactly as written in the panel e.g. Garage Door is not acceptable. It has
to be written as Garage-Door in the panel and the respective command will be Garage-Door.
NOTE: The user automation outputs can also be activated via the keypad or the keyfob.
Checking the user automation outputs status via SMS text commands
1234 Output 1 1234 = User Code. User Output 1 status
check. OUTPUT 1 ON or OUTPUT 1 OFF
1234 Output Garage-Door Status 1234 = User Code. Output Garage-Door
status check. OUTPUT Garage-Door ON or
OUTPUT Garage-Door OFF
NOTE: Output names have to be one word and spelled exactly as written in the panel e.g. Garage Door is not acceptable. It has
to be written as Garage-Door in the panel and the respective command will be Garage-Door.
Changing a mobile number via SMS text commands
1234 Change 07777888999
07878888999 1234 = User Code. Change number
07777888999 to number 07878888999 CHANGE 07878888999
NOTE: Use the appropriate international dialling code (e.g. +44) when necessary (i.e. for foreign SIM cards). For example if you
wanted to message a foreign SIM card at your holiday home abroad. When you send the SMS command, ensure you enter a
space between the two mobile numbers.
76 Enforcer Installation Guide 102017854 - V01