PURSUIT C238, Owner'S Manual

Page: 27 / 118

Electrical System
4-3
Section 4
C238
4.3 Helm Switch Panel
The helm panel contains switches and circuit
breakers. The circuit breakers are the
“plunger” type; push to reset. Breakers are
normally in the ON position. Should any of
the breakers trip, reset by pressing the
plunger. The following are descriptions of
the components controlled by the helm
switches:
Overhead Lights
Press to activate the floodlights located
under the optional T-top.
Cockpit
Press to activate the lights that illuminate the
cockpit area.
Spreader Lights
Activates the floodlight located on the
optional T-top. These lights provide addi-
tional lighting for the rear of the cockpit.
Nav/Anc
Press the top of the rocker switch to activate
the navigation lights. Press the bottom of the
rocker switch to activate the anchor light.
ACCY
This is an open switch and reserved for
future additional accessories. DO NOT
exceed 10 amps.
Power Steering (Optional)
Press to activate the power steering pump.
Horn
Press to activate the horn.
Fresh Water (Optional)
Press to activate the fresh water pump. The
pump is a pressure-on-demand type and is
protected by a circuit breaker and an auto-
matic re-set at the breaker on the pump.
Washdown
Press to activate the raw water washdown
pump. The pump is a pressure on-demand
type and is protected by a circuit breaker on
an automatic reset breaker in the pump
motor.
Livewell
Press to activate the livewell circulation
pump to supply water to the livewell. The
pump is protected by a circuit breaker on the
helm panel and an automatic reset breaker
in the pump motor.
Helm Switch Panel