they are not leaking. Open all seacocks and make certain that
the hoses and fittings are not leaking.
4 . 3 . 1 . Fresh Water System
Prepare the fresh water system for operation. To prepare the
system follow this procedure:
1. Turn on the fresh water pump.
2. Open both faucets at the galley sink.
3. When the pink potable water anti-freeze stops flowing
from the faucets, turn off the faucets.
4. Turn off the fresh water pump.
5. Fill the fresh water tank with fresh water. The fill is
located on the starboard side deck, near the helm area
(see Figure 4-4). The tank should be filled until water
runs out of the vent on the hull side, just below the fill.
6. Switch on the fresh water pump. Open all the faucets in
Figure 4-4: Water Fill
AFTER LAUNCHING YOUR BOAT
COMMISSIONING YOUR BOAT
4-6
3000 Offshore Express
Summary of Contents for 3000 OFFSHORE EXPRESS
