MAKE SURE THAT ALL HATCHES TO THE FUEL
COMPARTMENT ARE OPEN FOR A MINIMUM OF FIVE
MINUTES, AND THAT YOU OPERATE THE BILGE
BLOWERS FOR A MINIMUM OF FOUR MINUTES,
BEFORE THE ENGINES ARE STARTED, OR ANY
OTHER ELECTRICAL EQUIPMENT IS USED.
9. Open all ports, hatches and doors.
10. Put the switch for the blowers in the ON position. The
switch is located on the helm switch panel.
TO REDUCE THE RISK OF FIRE AND/OR EXPLOSION,
INVESTIGATE ALL FUEL ODORS IMMEDIATELY AND
D O N O T S TA R T T H E E N G I N E S , O R O T H E R
E L EC T RI CA L E Q UIP M EN T, OT HER T HAN T HE
BL OW ER S . F UE L F UM E S ARE DANG E RO US ,
HAZARDOUS TO YOUR HEALTH, AND COULD CAUSE
SERIOUS INJURY OR DEATH.
11. Check the engine room and bilge areas for fuel odors.
If you smell fuel, do not start the engines or other
electrical equipment. Investigate the cause, correct,
and completely ventilate the bilge area before
proceeding.
3 . 1 . 3 . Starting Your Engines
Before starting your engines, be sure that you have performed
all the maintenance checks listed under Section 3.1, When
Arriving at Your Boat. To start your engines, follow these steps:
1. Open all hatches to the bilge area and operate the
blower for at least four minutes. Investigate and
remedy any fuel vapors that are detected.
WARNING
WARNING
WHEN ARRIVING AT YOUR BOAT
OPERATING YOUR BOAT
3-4
3000 Offshore Express
Summary of Contents for 3000 OFFSHORE EXPRESS
