THE CLEATS ON THE BOW AND STERN OF YOUR
BOAT HAVE NOT BEEN DESIGNED FOR, AND ARE
NOT INTENDED TO BE USED FOR TOWING. USING
THEM FOR THIS PURPOSE COULD RESULT IN
PERSONAL INJURY AND DAMAGE TO YOUR BOAT
AND OTHERS.
Available optionally is an anchor roller in the bow pulpit, as well
as an anchor cleat.
1 . 5 . HULL SIDES AND TRANSOM
The port and starboard hull sides each have engine room vent
recesses, near midships, engine exhausts near the transom, and
a number of vents (see Figure 1-18) and thru-hulls. See Figures
1-19 and 1-20 for identification of each one.
Located on the transom of your
3000 Offshore
Express is the white stern light, recessed trim tabs, and two zinc
plates (see Section 5.4.6).
DO NOT SWIM AROUND BOAT WITH ENGINES
RUNNING, PROPELLERS MAY TURN AND CAUSE
SEVERE PERSONAL INJURY EVEN WITH ENGINES IN
NEUTRAL.
Rev. B 02/15/99
Figure 1-18: Vent Fitting
WARNING
WARNING
HULL SIDES AND TRANSOM
EXTERIOR EQUIPMENT AND FEATURES
1 - 24
3000 Offshore Express
Summary of Contents for 3000 OFFSHORE EXPRESS
