sheets, etc. out in the sun to allow them to dry thoroughly and
air out well. If they get wet with salt water, due to a hatch or
porthole being left open, be sure to rinse them with fresh water
to remove the salt crystals and then dry thoroughly. Salt crystals
retain moisture and will damage the material.
The carpet should be vacuumed periodically and cleaned just the
same as a home carpet.
The formica surfaces should be cleaned with a mild soap and
water, or a non-abrasive cleaner, such as Soft Scrub
®
, for difficult
stains.
Plexiglass surfaces should be cleaned as in Section 5.4.2.
5 . 6 . ENGINE ROOM
The engine room should be kept clean and free of any debris.
A clean engine room assures that the engines (and generator, if
installed) will receive a clean supply of air while running, and any
Rev. B 08/17/98
Strut
Rudder
Propeller
(see Figure 4-2)
Propeller Shaft
Engine
Coupling
(see Figure 4-5)
Stuffing Box
(see Figure 5-5)
Figure 5-4: Propulsion System
ROUTINE MAINTENANCE
ENGINE ROOM
3000 Offshore Express
5-11
Summary of Contents for 3000 OFFSHORE EXPRESS
