Puretec Radfire RI Series, User Manual

Page: 22 / 28

22 Installation & Operation Manual Copyright © Puretec Pty Ltd 2021
Solenoid Connection Module
Connects a normally closed line voltage solenoid valve to the
controller. Maximum contact rating is 240VAC (50-60Hz) / 30VDC
/ 2A. On a monitored system, the solenoid is closed when the UV
level drops below 50%. Also note that in cases where emergency
use of untreated water is required, the controller can be placed
into a manual override mode allowing for the flow of water in an
alarm condition. Order RI-SOL .
4-20 mA Module
Outputs a 4-20mA signal of the UV output to a remote device
such as a data logger or computer. Order RI-MOD420 .
WiFi Module
The WiFi module and accompanying IoT application allows you to connect your UV system
to a smart phone, tablet, computer or other connected platform. View system status, receive
SMS or email messages of alarm conditions and monitor the health of your UV from
anywhere via this connected platform. Connect the device via the APP found on Google Play
or the APP Store and connect your UV device to your router, then download the software for
your connected device and have peace of mind that your UV system is providing safe, reliable
disinfection. Order MOD-APP .
Ultrasonic Flow Meter Module
The ultrasonic flow meter module ensures your UV runs as efficiently and effectively as
possible. By harnessing the power of ultrasonic waves, it enables your UV system to dim
power in times of low to no flow, saving you money on energy, reducing water temperature,
and decreasing the risk of fouling.
Expansion Modules