18
Installation & Operation Manual
Copyright © Puretec Pty Ltd 2021
System Service Suggested
Controllers will display the System Service Suggested Screen every 6
months to remind consumers to maintain both their UV and other pre-
filtration. This will serve as a prompt only and will not put the system into
alarm. To clear this condition simply press the button located below the
screen.
Lamp Replacement
After the lamp is expired, it must be replaced with the same part number as indicated on
the Maintenance Parts screen or on the label on the reactor. With the system powered down,
remove and discard the lamp key from the controller. The replacement lamp is packaged with
a lamp key on the connector at the end of the lamp. Remove the key from the lamp and place
it in the controller. Refer to Installation for instructions on installing the new lamp.
QR Codes
Puretec uses the QR code to store a link to a specific page on our
website. Camera phones equipped with the correct reader application
can scan the image of the QR code and connect to a Puretec web page.
Puretec’s QR web page has information on how to purchase replacement
components as well as a helpful video directory on system servicing (i.e.
How to change a UV lamp or quartz sleeve).
System Service Suggested
Summary of Contents for Radfire RI Series
Page 28: ......
