Page 8
Hot Cold
Hot Cold
Preheated
Water
1
2
3
4
5
A
B
6
7
8
9
10
11
6.
The quickconnect fitting for the plastic tubing bringing raw water from the
saddle-tapping valve (Item 5).
7.
The WATT’R TWIN has a power cord which plugs into a standard
grounded wall outlet.
8.
When the steam from the distiller rises, it goes up through the silicone
tubing (Item 8) into a patented hollow stainless steel condenser which
screws into the hot water tank where the heating element is normally
placed. Here the cooler water in the water tank comes into contact with
the outer surface of the condenser and removes heat produced by the
steam. When the heat is removed, two things happen:
a.
The water in the hot water tank heats up
b.
The steam cools down and converts to high purity distilled water.
9.
The connection of the thermostat in the hot water tank to the electronic
controls inside the distiller. With this connection, the distiller automatically
turns on and off depending on the need for drinking water, and the tem-
perature of the water inside the hot water tank.
10.
This is the distilled water delivery line. Distilled water is pumped by the
built-in pump to the distilled water faucet at your sink.
11.
Water from the boiling chamber is automatically drained through this tube.
This reduces the amount of buildup and maintenance for the boiling
chamber. The tube must be connected to the drain with an appropriate
CAUTION:
Water from
the drain can be very hot
and could burn. Keep
children and pets away
from the drain line.
Figure 1
Summary of Contents for WATT'R TWIN
Page 20: ...Page 20 Electrical Schematic ...
Page 21: ...Page 21 Exploded View ...
