manualshive.com logo in svg

Pure Water WATT'R TWIN, Owners And Installation Manual, Page: 2 / 22

Share
Download
Pure Water WATT'R TWIN Owners And Installation Manual Download Page 2

Page 2

Table of Contents

Important Safety Information ........................................................... 3

Introduction ..................................................................................... 4

Record Important Information ......................................................... 4

Included With Your Distiller ............................................................. 5

Optional Accessories ...................................................................... 5

How Your Distiller Works ................................................................. 6

Getting to Know Your Distiller ......................................................... 7

Preparing for Installation ............................................................... 10

Installation and Initial Start-up ........................................................ 11

Maintenance and Cleaning

Overall Maintenance Requirements ........................................ 14

Cleaning the Boiling Tank ........................................................ 14

Changing the Post Filter .......................................................... 15

Troubleshooting ............................................................................ 16

Electrical Schematic ...................................................................... 19

Exploded View .............................................................................. 20

Parts List ........................................................................................

21

Summary of Contents for WATT'R TWIN























Reviews:

No comments