Page 15
Routine Maintenance and Cleaning
Overall Maintenance Requirements
The following guide should be used for the maintenance of your distiller. The
timing will vary according to your local water conditions. Without proper
maintenance, your distiller may not produce optimum results. The following is
an average guide to maintenance:
Cleaning the Boiling Tank
Notes and Cautions:
Caution
:
Under no circumstances should the cleaning solution be heated
and run through a steam sterilization or distillation cycle.
Note: Failure to clean the boiling tank can result in scale buildup causing
premature heating element failure.
To clean the boiling tank:
1. Unplug the distiller from the wall.
2. Carefully feel the boiling tank lid and check the temperature. If it is hot, wait at
least 30 minutes for the unit to cool.
3. After the unit is cool, remove the boiling tank lid.
4. Using a pitcher, add hot water from your tap until it reaches just above the
scale line.
5. Add Lumen
™
by following the directions on the package.
6. Replace the boiling tank lid and let the solution stand overnight.
7. After the scale has softened, plug the distiller into the wall. This will allow the
boiling tank to drain.
8. Rinse the boiling tank using a pitcher of tap water and allow it to drain. Re-
peat this procedure until boiling tank is clear of Lumen.
DO NOT allow the
Lumen to remain in the Boiling Chamber.
CAUTION:
UNDER NO
CIRCUMSTANCES
SHOULD THE CLEAN-
ING SOLUTION BE
HEATED AND RUN
THROUGH A STEAM
STERILIZATION OR
DISTILLATION CYCLE.
Note:
Failure to clean
the boiling tank can
result in scale buildup
causing premature
heating element failure.
Summary of Contents for WATT'R TWIN
Page 20: ...Page 20 Electrical Schematic ...
Page 21: ...Page 21 Exploded View ...
