Page 11
A dju st u n ti l
t he u ni t is le v el
Leveling Feet
Figure 4
Installation and Initial Startup
Note: Installation Should Be Done by a Qualified Installer
CAUTION
•
The WATT'R TWIN is heavy. Please use care when removing it from the
carton to prevent injury.
•
DO NOT use a hot water line for your supply line.
DANGER
DO NOT PLUG THE UNIT INTO THE POWER SOURCE UNTIL
INSTRUCTED.
Positioning the unit:
1. Open BOX #1. Remove the drinking water system and frame. Make sure
that it remains in the upright position. Place in the desired location. Posi-
tion the pull-out drawer to the front.
2. Remove the parts kits and packing materi-
als packed in the distiller.
3. Open Box #2. Lift the hot water tank out
and position it on the distiller frame. Line it
up with the marks on the distiller frame
platform.
4. Level the entire unit using the adjustable
feet (Figure 4).
Connecting the Drain Line
1.
Open the drawer
so that the boiling
tank is in view.
2.
Connect the 5/8”
tubing to the
boiling tank
solenoid. Run the
tubing through the drain line hole on the side. Run to a drain that is rated
to carry water at, or near, boiling temperatures. (See Figure 5.) Add the
drain clamp to secure the hose.
Figure 5
Slide Tubing on to the
solenoid and secure
Run to
the drain
Summary of Contents for WATT'R TWIN
Page 20: ...Page 20 Electrical Schematic ...
Page 21: ...Page 21 Exploded View ...
