Page 10
Preparing For Installation
Selecting a Location:
The ideal location for the WATT’R TWIN will have:
•
Level area near the existing home water heater (gas, electric, or oil-fired).
•
At least 25 inches clearance in front of the unit so the drawer can be opened
or removed for maintenance.
•
Floor drain within 6 feet of the unit, or suitable condensate pump.
•
The electrical receptacle must be a fully grounded, single phase, AC 115-120
volt, 15 amp minimum circuit. If a two-pronged wall receptacle is encoun-
tered, it is the personal responsibility and obligation of the customer to con-
tact a qualified electrician and have it replaced with a properly grounded
three-pronged wall receptacle or have a grounding adaptor properly
grounded. (CAUTION: DO NOT USE AN EXTENSION CORD.)
Tools Needed:
•
Phillips head screwdriver
•
Pliers
•
Several crescent wrenches
•
Utility Knife for cutting tubing
•
Drill with a extension and a 3/4” wood bit
•
Tools needed for connecting and sweating copper piping together.
•
5 Gallons of distilled waer.
Summary of Contents for WATT'R TWIN
Page 20: ...Page 20 Electrical Schematic ...
Page 21: ...Page 21 Exploded View ...
