Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
31
Chapter 3: Getting To Know The WORKABOUT PRO
Indicators
•
Select the
Calibration
tab, and then tap on the ‘
Recalibrate
’ button.
Figure 3.6 Calibration Screen
•
Follow the directions on the calibration screen to calibrate the screen.
Note:
The
Stylus Properties
dialogue box provides two additional tabs:
Double-tap
and
Options
. The
Double-Tap
tab allows you to adjust the sensitivity of the dou-
ble-tap and the physical distance between taps. The
Options
tab allows you
to disable the touchscreen.
3.6 Indicators
The WORKABOUT PRO uses an LED (Light Emitting Diode), onscreen messages
and audio tones to indicate the various conditions of the hand-held, the batteries, the
scans and so on.
3.6.1 The LED
The WORKABOUT PRO is equipped with a single, dual-coloured LED. When the
<ENTER/ON> key is pressed, the LED flashes green to indicate that the unit has
been powered up.
