manualshive.com logo in svg

Psion Teklogix WORKABOUT PRO M/C, User Manual

Share
Download
Psion Teklogix WORKABOUT PRO M/C User Manual Download Page 159

Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual

133

Chapter 8: Peripheral Devices & Accessories

Carrying Accessories

8.1  Carrying Accessories

There are a variety of carrying accessories to help the operator work safely and 
comfortably with the WORKABOUT PRO.

Table 8.1  Carrying Accessories

Important:

Do not use adhesives such as Loctite to secure the screws on 
carrying accessories. These chemicals may damage the plastic 
casing.

8.1.1  Attaching The Hand Strap

The hand strap can be attached to the back of the WORKABOUT PRO to provide a 
secure means for operators to carry the hand-held.

The hand strap is attached to the back of unit using two Phillips head screws 
provided with this accessory.

Carrying Accessory

Model Number

Hand Strap

WA6020

Pistol Grip

WA6001

Protective Vinyl Case

WA6090

Soft Shell Holster

WA6050

Summary of Contents for WORKABOUT PRO M/C

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands