manualshive.com logo in svg

Psion Teklogix WORKABOUT PRO M/C, User Manual

Share
Download
Psion Teklogix WORKABOUT PRO M/C User Manual Download Page 34

Chapter 1: Introduction
Features

8

Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual

-

Single battery charger

-

Quad battery charger

-

Charger/Docking Station (charges hand-held and spare battery)

-

Vehicle cradle with optional charge capability

-

Automotive adaptor

•

Communication Accessories:

-

Quad Dock (4-site) with 10/100BaseT Ethernet and charge functions

-

Desktop Charger/Docking Station supports USB host and device ports 

and optional 10/100Base T Ethernet module. 

-

Powered/non-powered cradle for vehicle applications

-

Port Replicator for vehicle cradles (field installable option) includes 3 

RS232 ports plus USB device port.

•

Carrying Accessories:

-

handstrap, pistol grip w/ trigger, shoulder strap.

-

holster, belt loop, protective vinyl carrying case with belt clip.

Summary of Contents for WORKABOUT PRO M/C

























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands