Psion Teklogix WORKABOUT PRO Hand-Held Computer User Manual
123
Chapter 7: Expansion Modules
Expansion Modules
7.1 Expansion Modules
Easily installable expansion modules available for the WORKABOUT PRO allow
you to customise this hand-held to meet your specific mobile computing
requirements. This chapter outlines how to install the following expansion modules:
PCMCIA, GSM/GPRS and SE 1223HP scanner.
7.1.1 Removing The End-Cap And Back Plate
To install a module, you’ll need to remove the end-cap and back plate on the
WORKABOUT PRO. This is a simple process of unfastening four screws on the
end-cap and six screws on the back plate.
Figure 7.1 Removing The End-Cap And Back Plate
Back plate
End-cap
SW1401
Power Switch