background image

 

Service 

PowerPlay IPC-8000 and IPC-9000 

 

 

4826 Sterling Drive, Boulder CO 80301 

 

        15-052-01-1-DOM-B 

PH: 720.406.8946 [email protected] www.psaudio.com

 

 

 

©2010 PS Audio International Inc. All rights reserved. 

 

   

If   you   require   service   in   North   America   

In   the   unlikely   event   there   is   a   problem   with   your   PS   Audio   component,   please   contact   your   dealer,   distributor,   or   the   PS   Audio   
corporate   research   center   to   discuss   the   problem   before   you   return   the   component   to   our   facilities   for   repair.      Products   shipped   to   
the   corporate   research   facilities   will   be   refused   and   returned   freight   collect   if   not   accompanied   by   a   PS   Audio   Service   Department   
issued   return   authorization   number   (RA   Number).   
   

Obtain   an   RMA   Number   

Return   authorization   numbers   must   be   prominently   displayed   on   the   outside   of   the   box   and   an   accompanying   letter   describing   the   
problem   and   re-­‐listing   the   RA   number   must   be   inside   the   box   to   qualify   for   service.   
   
If   you   are   transferring   your   warranty,   you   must   first   contact   PS   Audio   or   your   dealer   or   distributor   for   details.      
      

Contact   Information   

To   contact   the   PS   Audio   Service   Department:   
   
TELEPHONE   

720-­‐406-­‐8946   

HOURS      Monday-­‐Friday,   9:00   am   to   5:00   pm   MST      
FAX                                             

720-­‐406-­‐8967   

E-­‐MAIL                              

[email protected]   

WEBSITE                  

http://www.psaudio.co   

   

If   you   are   in   the   United   States   use   the   following   procedure:   

      
1.         Obtain   a   Return   Authorization   Number   (R/A   number)   and   shipping   address   from   the   PS   Audio   Service   Department.   
   
2.         Insure   and   accept   all   liability   for   loss   or   damage   to   the   product   during   shipment   to   the   PS   Audio   factory   and   ensure   all   freight   
(shipping)   charges   are   prepaid.   
   
The   product   may   also   be   hand   delivered   to   the   California   or   Colorado   facilities   if   arrangements   with   the   Service   Department   have   
been   made   in   advance.   Proof   of   purchase   will   be   required   for   warranty   validation   at   the   time   of   hand   delivery.   
   

Use   Original   Packing   

Use   the   original   packaging   to   ensure   the   safe   transit   of   the   product   to   the   factory,   dealer,   or   distributor.   PS   Audio   may,   at   its   
discretion,   return   a   product   in   new   packaging   and   bill   the   owner   for   such   packaging   if   the   product   received   by   PS   Audio   was   boxed   
in   nonstandard   packaging   or   if   the   original   packaging   was   so   damaged   to   the   point   it   was   unusable.   If   PS   Audio   determines   that   
new   packaging   is   required,   the   owner   will   be   notified   before   the   product   is   returned.   
      

Summary of Contents for PowerPlay IPC-8000
















































Reviews: