Configuration and Use
PowerPlay IPC-8000 and IPC-9000
4826 Sterling Drive, Boulder CO 80301
15-052-01-1-DOM-B
PH: 720.406.8946 [email protected] www.psaudio.com
©2010 PS Audio International Inc. All rights reserved.
Network
The Network page allows you to modify the network settings of your PowerPlay unit. Please exercise
extreme caution when modifying any settings as the incorrect settings will result in loss of network
connectivity.
Host Name
– The Host Name can be used to access your PowerPlay by typing a name into your
browser rather than the local IP address. To alter the Host Name type the new name in the text
field.
Enable DHCP –
PowerPlay is setup to rely on a DHCP enabled router or switch. If you do not
have DHCP enabled on your network or wish to set up your PowerPlay as a static address on
the local network you may choose to disable DHCP by clicking the checkbox to remove the
check. In order to maintain network connectivity you must know and complete the network
settings.
