Configuration and Use
PowerPlay IPC-8000 and IPC-9000
4826 Sterling Drive, Boulder CO 80301
15-052-01-1-DOM-B
PH: 720.406.8946 [email protected] www.psaudio.com
©2010 PS Audio International Inc. All rights reserved.
Outlet Labeling
1.
Select the outlet you wish to modify by touching the corresponding outlet on the front panel.
Once selected the outlet will begin to flash.
2.
Press
SELECT
and in the LCD window you will see the switch mode begin to flash. Press
SELECT
again, you will see the Outlet Label begin to flash. We are now ready to modify the
Outlet Label.
3.
Pressing
EDIT UP
will cycle through the available switch modes as follows (
EDIT DOWN
cycles though the same list in reverse order):
Processor,
Receiver
DVD Player
CD Player
Transport
DAC
Tuner
Projector,
Television
Cable TV
Satellite
VCR
DVR
Music Server
Game
Turntable
Phono Amp
Preamp
Integrated
Power Amp
Power Amp #1
Power Amp #2
Power Amp #3
Power Amp #4
Subwoofer
Automation
Router
Modem
Network
Zone #
(default)
4.
To confirm and save your selection press
SELECT
while the desired setting it flashing.