Installation
PowerPlay IPC-8000 and IPC-9000
4826 Sterling Drive, Boulder CO 80301
15-052-01-1-DOM-B
PH: 720.406.8946 [email protected] www.psaudio.com
©2010 PS Audio International Inc. All rights reserved.
IP Status
Once connected to the internet the PowerPlay’s proprietary internet connection service will auto detect and
configure the required settings. An IP status indicator light is provided on the front panel to indicate the status as
follows:
Red
Red
– PowerPlay is not connected to the local network. Check to make sure the Ethernet cable is
connected between PowerPlay and an active network connection.
Yellow
Yellow
– PowerPlay is connected to the local network, but not to the web.
Green
Green
– PowerPlay is connected to the local network and the web. Configuration and control can
now be performed either through the external or internal websites.
By default PowerPlay is setup to rely on a DHCP enabled router or switch. If you are unable, or do not wish, to
enable DHCP on the router or switch please refer to section titled
2.6.2 Internal Website Configuration
to
configure the PowerPlay as a static device within the local network.
