Configuration and Use
PowerPlay IPC-8000 and IPC-9000
4826 Sterling Drive, Boulder CO 80301
15-052-01-1-DOM-B
PH: 720.406.8946 [email protected] www.psaudio.com
©2010 PS Audio International Inc. All rights reserved.
Configuration and Use
There are 3 methods for configuring and controlling the PowerPlay. The preferred and most powerful method is via the
PS Audio hosted site http://powerplay.psaudio.com. When the internet is unavailable or if the network requires advanced
setup the internal website is the next best method. The final and most limited method of control configuration is
accomplished via the front panel.
Web Based Configuration
The external website
http://powerplay.psaudio.com
is the preferred method for configuring and controlling the
PowerPlay. However this method requires the PowerPlay to have access to the World Wide Web, and a green IP
indicator on the front panel.
In order to register you will need to create an account with PS Audio and you will need to know the unit ID
number of the unit or units you would like to register. The unit ID number can be obtained from the rear panel of
the device or by one of the following methods:
IPC-9000 - touch the IP indicator repeatedly until the display window shows: “UNIT ID”
“######”
IPC-8000 - press the status button repeatedly until the display window shows: “UNIT ID”
“######”
