Prusa Research i3 MK2.5 Handbook Download Page 2

Page: 2 / 70

Please always refer to the

http://www.prusa3d.com/drivers/

for an updated version of this 3D printing handbook (PDF download).

Translated versions of the handbook are available at:

Czech:

www.prusa3d.cz/ovladace/

French:

www.prusa3d.fr/drivers/

German:

www.prusa3d.de/treiber/

Polish:

pl.prusa3d.com/sterowniki/

Italian:

www.prusa3d.it/driver/

Spanish:

www.prusa3d.es/drivers-y-manuales/

QUICK GUIDE TO THE FIRST PRINT

1. Read the safety instructions carefully (

page 7

)

2. Prepare for the upgrade (

page 10

)

3. Download and install the drivers (

page 41

)

4. Calibrate the printer by following our calibration flow / wizard (

page 11

)

5. Insert the SD card into the printer and print your first model (

page 26

)

Important notice, tip, hint or information that helps you print with ease.

Read carefully! This part of the text has the greatest importance - either for user
safety or for

proper

printer

service.

Handbook version 2.50 from March 2, 2018 © Prusa Research s.r.o.

Summary of Contents for i3 MK2.5







































































Search results

Summary of Contents for i3 MK2.5

Reviews:

Related manuals for i3 MK2.5

Brands by name

Popular brands

Prusa Research i3 MK2.5, Handbook

Search results

Summary of Contents for i3 MK2.5

Reviews:

Related manuals for i3 MK2.5

Brands by name

Popular brands