Proyecson PAA29+, Instruction Manual

Page: 7 / 54

INSTALLATION MANUAL: PAA29+ V 1.4 (07/2011) 7
2. INTRODUCTION
The Proyecson PAA29+ Automation adapter makes it easy to interface digital
cinema playback equipment with existing cinema control systems, enabling fully
automated presentations.
Input and output connections enable digital cinema equipment to control
existing lighting, automation, and other old systems. The unit converts network
or serial control from the digital cinema playback system in relay closures. The
unit can be connected in parallel with existing film automation systems making
it easy to switch between film and digital shows, and even to run seamless
presentations mixing both film and digital content.
Advanced features include 12 configurable momentary / latching outputs and 8
inputs that can be used for trigger individual cues. These relay closures can
drive 16 A 250 Vac / 16A 30Vdc in normally open and closed dry contacts.
Front-panel indicators are provided for all inputs and outputs, ensuring that
system status is clearly visible at all times.
The unit is easy to install and 19” rack-mounted. Rear panel connectors are
provided to allow an easy wiring.
Valid for any other application not related with Digital Cinema.