INSTALLATION MANUAL: PAA29+ V 1.4 (07/2011)
41
3.
In the “Signal Setup” pop-up window, left the “Any” in the “Source
device name” selection tab and press the “…” button in the “Signal
name” field.
Figure 8.3.4C
.
Figure 8.3.4C
4.
Pressing this button you will open the “Signal Library” pop-up window,
you must select the “Paa29+” in the “driver” window and choose the
appropriate input of the Paa29+ in the “Signal” window, every signal
matches the physical input with the same number in the device. You
can see an example for the Input 1 in the
figure 8.3.4D
.
Figure 8.3.4D
Summary of Contents for PAA29+
