Proyecson PAA29+, Instruction Manual

Page: 15 / 54

INSTALLATION MANUAL: PAA29+ V 1.4 (07/2011) 15
6.2 CONNECTION TO A DOREMI SERVER OVER ETHERNET
The connection of the PAA29+ to a Doremi server can be done through the
Ethernet port.
The PAA29+ must be added to the Doremi server as a new device and the
send/receive commands configured as explained throughout this manual.
First, set up the PAA29+ in order to enable the Ethernet port. To do this,
open top cover and set the jumper to “config 1” position in the W4
configuration jumpers
as shown on picture figure 6.2A .
Set the jumpers W3 and W5 from “NET CONFIG” to an “RX_E” and “TX_E”
position respectively as shown on
figure 6.2B .
Figure 6.2B
Figure 6.2A