INSTALLATION MANUAL: PAA29+ V 1.4 (07/2011)
28
8. SERVERS CONFIGURATION
In order to PAA29+ carry out its function, it’s not only necessary to configure
the device, but also the server. Regarding this aspect, the different
configuration ways for compatible servers will be described further on.
8.1. SERVER SELECTION IN THE PAA29+
To configure the server in the PAA29+, follow the next steps:
1.
Open the PAA29+.
2.
Configure the selection jumpers following the instruction already
described in the “CONNECTION PROCEDURE” section.
3.
Close the PAA29+
8.2. DOLBY SERVER CONFIGURATION
Follow the next steps to configure the Dolby server DSS200 or
DSS100/DSP100 in order to be operative with a PAA29+:
1.
Go to the “SYSTEM” menu
2.
In the tab “AUDITORIUM” mark the option “This automation uses serial
automation” and save. It activates the “SERIAL AUTOMATION”
menu
tab (
Figure 8.2A
)
Figure 8.2A
Summary of Contents for PAA29+
