Proyecson PAA29+, Instruction Manual

Page: 31 / 54

INSTALLATION MANUAL: PAA29+ V 1.4 (07/2011) 31
8.3 DOREMI SERVER SET-UP
This manual is based on the Doremi software version 1.0.4-0, other versions
could have little differences
8.3.1
ADD THE PAA29+ TO THE SERVER
You must add the device before initiating a connection between the PAA29+
and the Doremi server by following the next steps:
1. Turn on the server.
2. Start the “Device Manager”, by accessing through the Menu ->
Doremi Labs Inc. -> Device Manager .
3. Click on the icon “Add” in order to add a device.
4. On the appearing pop-up window, select the device “Raw” as you can
see in the
picture 8.3.1A .
Figure 8.3.1A
5. Write “Paa29+” in the field “Identifier”. In case it is not written
likewise the server will not identify or recognize the input commands
from the PAA29+.
6. Write in the field “Device IP” the IP of the PAA29+.
7. Select on the drop-down tab “Protocol” the UDP protocol.
8. Write the number “10001” in the field “Port”.