Introduction
8
System Requirements
To begin using the Harmony 802.11a Access Point, you must have the following items
installed on your local network:
•
A 10Base-T Ethernet or 100Base-TX Fast Ethernet switch or hub
•
At least one 802.11a adapter
Note:
If you want to create a Harmony System that provides centralized manage-
ment, configuration, filtering, and security, you will also need at least one
Harmony Access Point Controller (with firmware version 2.0 installed,
although version 2.1 or greater is recommended).
The Product Package
Each Harmony 802.11a Access Point package includes:
•
One Harmony 802.11a Access Point
• Model 8569/8570 with two integral antennas, or
• Model 8571 with two SMA antenna connectors
•
One power adapter (12V, 1 Amp)
•
One Wall Mounting Kit
•
One Harmony CD-ROM containing this user’s guide in Portable Document Format
(PDF)
•
One
Harmony 802.11a Access Point Quick Start Guide
If any of these items are missing or damaged, please contact your reseller or Proxim
Technical Support.
