Configuration
27
9.
When prompted, enter
default
in the
Password
field and click
OK
.
Note:
The
User Name
field is not used; you can enter any value in this field or leave
it blank. The default
Password
is
default
; it is case sensitive. You can
change the Password at any time from the System Access configuration
screen (see “System Access” on page 38).
10. Configure the Access Point’s settings as necessary or view the available
statistics. The configuration options and available statistics are described later
in this chapter.
11. Click the
Submit
or
Apply
button at the bottom of the screen to save any
configuration changes. The changes will take effect immediately, except for the
Network parameters, which will not take effect until the Access Point is rebooted.
12. When finished, close the Web browser.
