18
Chapter 2
Installation
This chapter describes how to install the Harmony 802.11a Access Point. If you intend
to use the Harmony 802.11a Access Point with a Harmony Access Point (AP) Controller,
install the AP Controller first.
Note:
The AP Controller must have firmware version 2.0 installed to support the
Harmony 802.11a Access Point (version 2.1 or greater is recommended).
Confirm that the AP Controller has the latest firmware version before install-
ing the 802.11a Access Point.
Pre-installation Considerations
Regulatory Warnings
FCC Guidelines
It is the responsibility of the installer and users of the Harmony 802.11a Access Point
to guarantee that the antenna is operated at least 20 centimeters from any person.
This is necessary to insure that the product is operated in accordance with the RF
Guidelines for Human Exposure which have been adopted by the Federal
Communications Commission.
