Configuration
41
•
Packets Filtered
: This statistic displays the number of packets that the Access
Point did not forward to the radio network because the packet’s destination was
listed in the Access Point’s forwarding table as a node on the Ethernet network.
•
Buffer Fails
: An Access Point temporarily stores the packets it receives from one
network interface before forwarding them to the other. The Access Point stores
these packets in its buffer memory, which only has a limited amount of space
available. The Access Point increments the Buffer Fails count when the buffer
memory is full and the Access Point cannot receive additional packets from the
Ethernet or radio. This may result in lost data or delayed transmissions.
Reboot Button
A
Reboot
button appears in the upper right-hand corner of the browser screen when
viewing the Configure or Statistics parameters.
Click this button to remotely reboot the Access Point. Note that the Access Point will
briefly search for an AP Controller following a reboot. You will not be able to access
the Web configuration tool during this time.
