DP-503-F4A3 RAID SUBSYSTEM
Installation and User Manual
63
3.9.2.1 View/Edit Host Name List
To set up LUN masking for each Volume Set, a host list should be established first. This is done by
clicking “View/Edit Host Name List” link at bottom of “Fibre Channel Config” page (Refer to Section
3.9.2). Only hosts that will be used as include/ exclude filters are necessary to be added.
The subsystem provides two ways to add a host to the host list:
1. Select WWN from the Host Name List the detected host.
2. First, enter the WWPN (exact 16 hex digits) of the host in the “Host WWN” text field. Optional
host nick name (up to 23 ASCII characters) can be given for descriptive purposes.
Choose “Add” operation, then Confirm/Submit to complete the add operation.
The added host will be shown in the Fibre Channel Host Name List. Up to 20 hosts can be added.
To delete a host from the list, select the radio button corresponding to the host in the Fibre
Channel Host Name List. Choose “Delete” operation, and then Confirm/Submit to complete the delete
operation.
Once Volume Sets are created and the host name list is established, Volume Set Host Filters can be
configured by clicking “View/Edit Volume Set Host Filters” link at the bottom of “Fibre Channel
Configuration” page. Volume Set Host Filters can also be specified by clicking “Volume Set Functions”
and selecting “Volume Set Host Filters” from the menu frame. Select the Volume Set for LUN masking
and then click the Submit button.
Summary of Contents for DP-503-F4A3
