Proware DP-503-F4A3, Installation And User Manual

Page: 66 / 84

DP-503-F4A3 RAID SUBSYSTEM
66 Installation and User Manual
Access Mode
For certain applications, it is desired to limit the data access as “Read Only” so that the data on the
volume won’t be accidentally modified. This can be done by setting the Access Mode of the
Included host WWN as “Read Only”. However, some Operating Systems (e.g. Linux) may ignore
this “Write Protect” attribute and still issue write commands to the protected volumes.
“Data Protected” error will be generated by these write commands. It is suggested to mount the
volumes as “Read Only” for a consistent behavior, if possible.