Proware DP-503-F4A3, Installation And User Manual

Page: 72 / 84

DP-503-F4A3 RAID SUBSYSTEM
72 Installation and User Manual
3.9.10 Modify Password
To change or disable the RAID subsystem’s admin password, click on the Change Password link
under the System Controls menu. The Modify System Password screen appears.
The factory-default admin password is set to
00000000 . Once the password has been set, the user
or administrator can only monitor and configure the RAID subsystem by providing the correct
password.
The password is used to protect the RAID subsystem’s configuration from unauthorized access.
The RAID controller will check the password only when entering the Main Menu from the initial
screen. The RAID subsystem will automatically go back to the initial screen when it does not
receive any command after sometime.
To disable the password, enter only the original password in the Enter Original Password box,
leave both the Enter New Password and Re-Enter New Password boxes blank. After selecting
the Confirm The Operation option and clicking the Submit button, the system password
checking will be disabled. No password checking will occur when entering the main menu from the
starting screen.
3.9.11 Upgrade Firmware
Please refer to Section 3.12 for more information.