Proware DP-503-F4A3, Installation And User Manual

Page: 24 / 84

DP-503-F4A3 RAID SUBSYSTEM
24 Installation and User Manual
1. Attach network cable to the R-Link port and connect the other end of network cable to
your network hub/switch. Or as alternative for configuration, you may connect the serial
cable to the Monitor port and to the serial port of your host/server.
2. Connect the Fibre optic cable(s) to the Fibre Host Channel(s) of the RAID subsystem and
to the FC switch or host/server’s FC HBA.
3. Connect the power cord to the AC input socket. Plug the other end of power cord to the
power source.
4. Press the power on switch at the front of the subsystem.
2.2 Installing Hard Drives
This section describes the locations of the hard in the subsystem and gives instructions on
installing a hard drive. The subsystem supports hot-swapping allowing you to install or replace a
hard drive while the subsystem is running.