manualshive.com logo in svg

ProSoft Technology RLXIC-SG, User Manual, Page: 75 / 136

Share
Download
ProSoft Technology RLXIC-SG User Manual Download Page 75

Configuring Modbus/BSAP 

RLXIC-SG 

♦

 Intelligent Cellular 

User Manual 

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM 

 

 
ProSoft Technology, Inc. 

Page 75 of 136 

May 29, 2009 
 

 

9.2 

Configuring the RLXIC-SG at the Polling Host for Modbus on UDP 

This section covers a Polling Host with standard Modbus, variations may need 
additional AT commands. 

9.2.1  Configure the listening/device ports 

In AceManager, select 

M

ISC

 in the side menu. 

 

The destination port for the modem at the host needs to match the device port 
(*DPORT) in use on all the modems at the remote sites. For example, if the 
remote modem's device port (*DPORT) is "12345", then the Modbus host 
modem's 

S53

 destination port should be set to "12345". 

Take note of (or set) the Device Port setting in *DPORT to configure the 
destination port on the remote modems. 

9.2.2  Configure the default mode for start-up. 

In AceManager, select 

UDP

 in the side menu. Select the appropriate 

MD

 mode 

from the drop down menu. 

 

Summary of Contents for RLXIC-SG









































































































































Reviews:

No comments