manualshive.com logo in svg

ProSoft Technology RLXIC-SG, User Manual, Page: 55 / 136

Share
Download
ProSoft Technology RLXIC-SG User Manual Download Page 55

Data Communication and Host Modes 

RLXIC-SG 

♦

 Intelligent Cellular 

User Manual 

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM 

 

 
ProSoft Technology, Inc. 

Page 55 of 136 

May 29, 2009 
 

7.2.4 Telnet 

Mode 

In AceManager you can configure Telnet operation. 

 

If you need to change the port for Telnet (for example, you have the default port 
blocked on your firewall), the option is on the 

O

THER

 tab. The default telnet port 

is 

2332

. You can also change the Telnet timeout, if the connection is idle, default 

2

 minutes. 

 

7.3 Serial 

Modes 

7.3.1 PPP 

In PPP mode, the RLXIC-SG acts as a PPP server, providing an IP address, and 
DNS servers (if available) to the connected device or computer. 

PPP mode is entered from the AT mode by using any of the following 
commands: 

ƒ

 AT\APPP 

ƒ

 ATDT10.0.0.1 

ƒ

 ATDT10001 

ƒ

  ATD#19788 or #777 *99***1# 

ƒ

 CLIENT 

Summary of Contents for RLXIC-SG









































































































































Reviews:

No comments