RLXIC-SG
♦
Intelligent Cellular
Configuration Commands
RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM
User Manual
Page 112 of 136
ProSoft Technology, Inc.
May 29, 2009
*PTREFRESH=n
Number of minutes of inactivity in PASSTHRU mode to resend the *PTINIT string
to the hardware module.
n=0
: Disabled
n=1-255
minutes
*RESETPERIOD=n
In PASSTHRU mode, modem will be reset after this period if no data has been
sent or received. Value is in hours.
n=0
: Disabled
n=1-255
hours
11.3.9 SMTP
SMTP (Simple Mail Transfer Protocol) is the de facto standard for email
transmission across the Internet. The RLXIC-SG can send messages using
SMTP if it has been configured to use a mail server.
Note:
You cannot send an Email with your RLXIC-SG unless the Email server you have configured
allows your RLXIC-SG as a relay host. Talk to your network administrator to ensure you can send
email through the email server using your RLXIC-SG.
SMS (Short Message Service) is another way to send messages via the cellular
network. Most SMS commands require the modem to be in PassThru mode.
Note:
SMS may not be supported by your account with your cellular carrier.
*NETSMS2EMAIL=n
Specify the SMS/E-mail server number. This maybe necessary to send an SMS
message to an email address. Cannot be used with AceManager.
n=SMS/E-mail server number
*SMTPADDR=[d.d.d.d][name]
Specify the IP address or Fully Qualified Domain Name (FQDN) of the SMTP
server to use.
d.d.d.d=IP Address
name=domain name
(maximum: 40 characters).
Summary of Contents for RLXIC-SG
Page 4: ......