manualshive.com logo in svg

ProSoft Technology RLXIC-SG, User Manual, Page: 107 / 136

Share
Download
ProSoft Technology RLXIC-SG User Manual Download Page 107

Configuration Commands 

RLXIC-SG 

♦

 Intelligent Cellular 

User Manual 

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM 

 

 
ProSoft Technology, Inc. 

Page 107 of 136 

May 29, 2009 
 

11.3.6 Dynamic IP 

This group includes commands specific to dynamic DNS. Dynamic DNS allows 
the RLXIC-SG to use a dynamic IP address account, with an IP address that can 
change each time you connect, and still allow you to use a fully qualified domain 
name to contact the RLXIC-SG using IP Manager running on a server with a 
dynamic DNS updater. 

 

*DOMAIN=name 

Domain (or domain zone) of which the RLXIC-SG is a part. This value is used 
during name resolutions if a fully qualified name is not provided, and also for 
DNS updates. This value can be up to 20 characters long. 

ƒ

 

name=domain name

 (that is, eairlink.com) 

If *DOMAIN=eairlink.com, then when ATDT@remote1 is entered, the fully 
qualified name remote1.eairlink.com will be used to perform a DNS query to 
resolve the name to an IP address. 

Tip:

 Only letters, numbers, hyphens, and periods can be used in a domain name. 

*IPMANAGERn=[name][IP address] 

Sets a domain name or IP address to send IP change notifications to. Up to two 
independent IP Manager servers can be set, using either AT*IPMANAGER1 or 
AT*IPMANAGER2. Updates to a server can be disabled by setting that entry to 
nothing (for example, "AT*IPMANAGER1="). 

ƒ

 

n=1

 : First IP Manager server. 

ƒ

 

n=2

 : Second IP Manager server. 

ƒ

 

name=domain name

 

Summary of Contents for RLXIC-SG









































































































































Reviews:

No comments