manualshive.com logo in svg

ProSoft Technology RLXIC-SG, User Manual, Page: 20 / 136

Share
Download
ProSoft Technology RLXIC-SG User Manual Download Page 20

RLXIC-SG 

♦

 Intelligent Cellular 

Activating RLXIC-SG on your cellular provider 

RadioLinx Intelligent Cellular Serial Modem for Global GPRS/GSM  

User Manual 

 

 
Page 20 of 136  

ProSoft Technology, Inc. 

May 29, 2009 

 

 

2 

Select 

TCP

,

 

UDP

, or 

PPP

. 

Enter the connection information. 

o

 

For UDP or TCP, enter 

192.168.13.31

 as the IP address. 

o

 

For PPP, select the COM port to which the modem is connected. 

Note: 

The simplest way to connect to the modem is through a USB cable. Refer to Universal Serial 

Bus (USB) (page 41) for information on how to install the necessary drivers for a USB connection.  

3 

Enter the password. The default password will be entered for you. 

4 

Click 

OK.

 

3.2.3 Enter 

the 

APN 

1 

Select 

GPRS

 from the menu on the left side of AceManager (under "Groups") 

 

2 

Type your APN in the New Value field of 

*NETAPN

. 

 

Optional: 

If you need to configure your modem for a custom APN, after entering the APN, there is 

additional information you will need to enter. 

Summary of Contents for RLXIC-SG









































































































































Reviews:

No comments